brass hollow pipes and tubes according to compositions and standards for direct use cuzn5 cuzn10 bs2870 cz121 bs2873 cz102 hard cartridge strength Home Profile Products Inquiry E-mail

Manufacturer and Supplier of of Brass Billets rods Copper alloy Extrusions, Brass Profile, Bronze Profile Section

Ingots

Copper Alloy Ingots
Brass Ingots
Bronze Ingots
Zinc Ingots
Lead Ingots

Billets

Copper Alloy Billets
Brass Billets
Bronze Billets
Zinc Billets

Rods / Bars

Copper Alloy Rods / Bars
Brass Rods / Bars
Bronze Bars / Rods

Profiles

Copper Alloy Profile
Brass Profile
Bronze Profile

Pipes / Tubes

Copper Alloy Pipes / Tubes
Brass Pipes / Tubes
Bronze Pipes / Tubes

Sheets
Copper Alloy Sheets
Brass Sheets
Bronze Sheets
Wire
Copper Wire
Brass Wire
We Buy
Copper Scrap
Brass Scrap
Zinc Scrap
Mix Metal Scrap

Brass Pipes / Tubes



Brass Pipes Tubes
 
 
 APPLICATIONS

Components production, architectural applications, interior design, modern art, furnishing and lamps, pumps, gunwales, plumbing, heat exchangers, vehicles, musical instruments, spray exquipment etc.
PROCESS

Extruded and drawn
 
 ALLOYS


CuZn37, CuZn30, CuZn15, CuNi10, CuZn20Al2As.

Other alloys upon request.
 

TEMPER

Hard, half-hard, light annealed and annealed
 
 PACKING

In random cut staight lengths approx. 4 m or cut to customer requirements. Packed in wooden cases from 200 kg to 500 kg. Tubes can be delivered stress relieved upon customer request.
 

 PRODUCTION RANGE

THICKNESS
(mm)
DIAMETER
(mm)
0.40-044
5.70-32
0.45-0.49
4.75-40
0.50-0.54
4.75-50
0.55-0.59
4.75-55
0.60-0.64
4.75-57.15
0.65-0.74
4.75-60
0.75-0.84
4.75-63.50
0.85-0.94
4.75-76.20
0.95-1.20
4.75-80
1.21-1.50
6-80
1.51-2
8-80
2.01-2.25
10-80
2.26-2.40
15-80
2.41-3
20-80
3.01-3.50
27-80
3.51-4
30-80
4.01-4.50
35-70
4.51-5
40-70

Brass tubes can also be produced in various shapes, such as square, reeded, and ropped.

WELDED
 
 APPLICATIONS

Automotive and ship building industry, heat exchange and condenser tubes, chemical industry and desalination, plumbing and bathroom accessories, decoration and redraw applications.
PROCESS

Welded through high frequency from srip. High Frequency (HF) welding process and on-line eddy current testing ensure the excellent quality of tubes. Hydraulic, pneumatic and expansion tests are also carried out according to ASTM B 543 and ASTM B 587.
 
 ALLOYS


Copper Alloys (CuZn5/10/15/20/30/33/37, CuZn36Pb0.5, CuZn20Al2).
Copper Nickels (CuNi 10/20/30).
Brasses (CuZn28Sn1, CuSn4/6/8).
Phosphor bronzes.

Other alloys upon request
 

TEMPER


Welded (Type I and II ASTM B587): soft, half-hard.
Welded and drawn (Type III ASTM B587): soft, half-hard, hard.
 

 PACKING


In straight lengths acc. to customer requirements. Packed in wooden cases.
 

 PRODUCTION RANGE

Outside diamter:
4,5-63,5mm
Wall thickness:
0,4-1,5mm



 

Related Keywords : Brass Pipes / Tubes, The relatively low zinc content of C31400 provides excellent corrosion resistance in potable water along with a pleasing golden color that matches C22000 hardware. Alloy C31400 is also suitable for outdoor use due to its resistance to stress corrosion cracking and to corrosion in general, but where the highest strength is not required, Similar to C31400, Leaded Commercial Bronze, Nickel Bearing C31600 is composed of approximately 89% copper, 8% zinc, and 2% lead, but also contains 1% nickel. This alloy combines the natural corrosion resistance and machinability of C31400 with a higher tensile and yield strength resulting from the controlled addition of nickel. The relatively low zinc content provides excellent corrosion resistance in potable water along with a pleasing golden color that matches C22000 hardware cuzn40pb2 cuzn39pb2 c38000 architectural bronze brass zinc ingots cw614n cuzn39pb3 cz121 low aluminium brass c38500 c40500 tin brass c41100 c42200 cuzn28sn1 cz111

Designed by : Image Websolutions

Manufactures copper alloy extrusions like extruded brass rod, profile, section, and imports zinc ingots, brass scrap, and copper scrap.